In a news release from Sun ’n Fun Aerospace Expo 2024, the company said the T182—like the 172, 206 and T206—has received interior facelifts and the first deliveries of the aircraft have occurred. Production of the T182 was paused in 2013 and Textron announced its revival in 2022.

“Textron Aviation’s investment in the Cessna piston aircraft lineup demonstrates the company’s continued enthusiasm and support for pilots worldwide, whether they are pursuing training ambitions or planning their next adventure,” the company said.

The upgrades announced include new seats, power headset jacks at every seat, A and C USB charging ports at every seat, along with side and cell phone pockets throughout the aircraft. There is also integrated overhead air conditioning on aircraft with that option and a new center armrest available on certain models.

Editor’s Note: This article first appeared on AVweb.

The post Textron Revives T182, Announces Upgrades appeared first on Plane & Pilot Magazine.

We’ve focused on deals under $100K for our Bargain Buys series so far, but we could not resist checking out the 1979 Cessna Skylane RG that popped up on the listings this week. You just don’t see many 182s going for less that $150,000, so we thought we’d take a closer look. 

The combination of utility and every-pilot-can-fly-this-ness of the 182 series makes it perennially popular, and this 182RG is no exception. The owner has had this model since 2005, and they have upgraded to a Cessna P210, which provides a little more speed and altitude capability. Nevertheless less, the 182RG for sale has 4,680 hours on the airframe, and a good IFR package in the panel. 

So why is it on sale for $125,000? It’s been flown well past TBO on the engine (3,256 hours!) so you will probably need to budget for a new one. That will add roughly $60K to $75K for a new Lycoming O-540 powerplant unless you go for a less expensive option. It also has a bit of damage history, a gear-up landing in 1984 that is accounted for in the airframe and engine logs.

But for the right buyer, this could be a reasonable way into Skylane ownership.

READ MORE: Why the Cessna 182 Skylane Is a Top Used Plane

Interested in more deals like this? Check out AircraftForSale.com and our new PlanePrice feature that gives you a window into the opportunities that are out there.

Need help financing your dream? Visit our professional team at FLYING Finance for the best way to back your aircraft acquisition plan.

The post Bargain Buys on AircraftForSale: 1979 Cessna Skylane 182RG appeared first on Plane & Pilot Magazine.

Flight Design reported in November that it had successfully completed an in-depth engineering audit with a CAAC team, clearing the way for validation and confirming compliance with certification specifications. The company is also working with longtime China-based partner FX on plans to manufacture the F2-CS23 in Shenzhen. The two companies have been working together since the start of the F2 project.

“This is a great achievement and related to the very good cooperation between CAAC, EASA and our team,” said Matthias Betsch, head of Flight Design’s EASA design organization. “The F2 is the first model of the F Series which follows the safety requirements of the new EASA CS23 certification specification and is providing outstanding safety, performance, space, and comfort for this kind of private-use and training airplane.”

The F2-CS23 has a top speed of 233 kph (126 knots), 2,000-kilometer (1,080 nm) range with 30-minute reserve, and maximum takeoff weight of 1,320 pounds. Powered by the 100 hp Rotax 912iS engine, it comes equipped with Garmin G3X flight displays. The model was developed as a certified version of Flight Design’s F2 SLSA and received its EASA type certificate in December 2021.

FAA validation for the F2-CS23 is also underway.

The post Flight Design F2-CS23 Lands CAAC Type Certificate Validation appeared first on Plane & Pilot Magazine.

1962 Mooney M20C Ranger

The classic Mooney M20 series was still in its early days when this Ranger rolled off the line in Kerrville, Texas. Many pilots of the era appreciated its combination of speed and efficiency, and these initial models weren’t stuffed with a ton of extras, leaving an owner today with good options for restoration. 

In the case of this Mooney M20C, you have 980 pounds useful load to work with. With 3,740 hours on the airframe, it’s not particularly high time, though the Lycoming O-360-A1D engine is past mid-time, you probably still have a couple years of flying before you might need to address it, though it was hung in 1982. The panel is vintage Narco, but this Ranger has been updated to ADS-B Out with a uAvionix tailBeacon.

READ MORE: The Marvelous Mooney M20

It’s priced to move at $52,000, from its current home in Ocean Springs, Mississippi.

Interested in more deals like this? Check out AircraftForSale.com and our new PlanePrice feature that gives you a window into the opportunities that are out there.

The post Bargain Buys on AircraftForSale: 1962 Mooney M20C Ranger appeared first on Plane & Pilot Magazine.

Rethought from the inside out, the G7 series—including the SR20, SR22, and SR22T—takes cues from the Vision Jet to simplify operation while incorporating added safety and luxury features. All three 2024 models have completed the FAA type certification process and are ready for delivery.

We took an exclusive first series of flights with the striking new G7 in the SR22 version in early December for a We Fly pilot report that will debut in FLYING’s Issue 945/February 2024, reaching subscribers later this month. Till then, we can share a few key details. Further reporting will follow in an upcoming issue of Plane & Pilot.

Central to the updates is the reimagined Perspective Touch+ integrated flight deck with 12- or 14-inch high-resolution displays, and twin GTC touchscreen controllers, to mimic the functionality and redundancy available in the Vision Jet SF50–and the ease of using a smartphone. Engine start has transformed into a push-button interface, preserving the ability to check mags and set mixture while making the process feel similar to that of the SF50. The updated automated flight control system (AFCS) incorporates smart servos and includes an optional yaw damper. 

Updated synoptic pages and streamlined checklists aid the pilot in monitoring both systems and procedures throughout all phases of flight. And the Cirrus IQ app gives the pilot remote viewing and control of certain aircraft functions. Cirrus Global Connect delivers worldwide text messaging, telephone service, and global weather.

It’s telling that Cirrus Aircraft looked up the model line to its Vision Jet to drive out complexity from its core single-engine pistons, sending its engineers on a journey to find ways to make the SRs as straightforward to operate as the jet. While that sounds like a contradiction, perhaps, pilots have opined about the complexity involved in stepping down from a light jet back into the high-performance piston world.  

To this end, Cirrus has introduced a new shallower menu structure in the touchscreen controllers, along with a scroll wheel for turning through the CAS-linked, on-screen checklists smoothly. Still on the ground, Taxiway Routing and a contextualized 3D Safe Taxi guide the pilot around complex airport layouts, decluttering and slewing the PFD imagery to match the airplane’s speed and position on the airport. In the air, the automatic fuel selection system automatically switches between fuel tanks every 5 gallons.

Additional Safety Features

Pilots will also find an improved flight control, incorporating a stick shaker function to piggyback on the other envelope protection features in the Perspective+ series, for enhanced low-speed situational awareness. Both the left and right controls vibrate to warn of an approaching stall condition.


Another new addition to envelope protection is flap airspeed protection. The system monitors airspeed to protect the pilot from accidentally deploying or retracting flaps when the aircraft is traveling too fast or too slow for the given flap configuration change. 

A Stylish and Functional New Interior

In addition to the magic up front, Cirrus also rethought the interior, taking a page from current luxury vehicles to incorporate a host of new features, including redesigned interior panels, dimmable task lights, and ambient accent lighting. 

More rugged cup holders, more pockets, and two center console compartments efficiently store your smartphone and other key things for better cockpit organization and accessibility. Powered headset jacks and lighted high-power USB-C outlets come positioned within easy reach of each seat. 


First SR20 G7 Customer

While only one new TRAC20 (SR20) G7 has been built, it’s already wearing its school colors—those of Western Michigan University College of Aviation in Battle Creek. The Broncos are longtime Cirrus flight training operators and will incorporate the new models into their aviation degree programs. The school will take delivery in the first quarter for integration into the flightline.

Pilots across the board can opt into several training options for the new Cirrus line, including the OEM’s recently released Private Pilot Program—taking a prospective pilot from first flight to certification in their new airplane.

“Our mission is to increase participation in aviation, so more people can benefit from the freedom, productivity, and joy it provides,” said Zean Nielsen, CEO of Cirrus Aircraft. “We have also developed a comprehensive ecosystem, providing global sales, flight training, maintenance, and support to ensure our owners have a seamless ownership experience. Our aircraft are truly designed with people in mind, and the new SR Series G7 is a testament to that philosophy. Our team and our aircraft provide a clear path to enter and advance within the personal aviation community by learning to fly and eventually transition to the Vision Jet with ease.” 

The post Cirrus Unveils the G7 Editions of the SR20, SR22, and SR22T appeared first on Plane & Pilot Magazine.

Quality Fly, a Madrid-based flight school, has announced a remarkable 37 percent growth in its fleet in 2023, recently adding a Tecnam P2006 multiengine piston airplane to the fold to complement the two P2008 singles it integrated earlier in the year. The school said the strategic expansion is aimed at upholding its commitment to providing top-notch airline pilot training.

The addition of the new Tecnam P2006 represents the second purchase of that model in November. The growth doesn’t end there, as the school said it is planning for additional aircraft arrivals in 2024 to meet the rising demand for enrollment.

Tecnam aircraft constitute 10 of Quality Fly’s fleet of 11, featuring three P2002JFs, five P2008JCs, and two Tecnam P2006Ts. The remaining airplane, a Cessna 172S, also plays a crucial role in upset prevention and recovery training.

Tecnam airplanes stand out as a gold standard for flight schools, renowned for their exceptional efficiency, boasting lower operational costs and enhanced sustainability. The company’s aircraft offer students unmatched visibility, facilitating seamless transitions between high-wing and low-wing environments.

Quality Fly’s new Tecnam P2006 is equipped with a factory-installed traffic advisory system, Garmin obstacle and terrain warning system, and accelerometer. The school said these features, coupled with ongoing upgrades across the fleet, demonstrate its dedication to providing a technologically advanced and safe learning environment.

The post Madrid’s Quality Fly Soars with New Tecnams appeared first on Plane & Pilot Magazine.

Over his lifetime until his death in 2015, Bede produced many efficient and capable general aviation aircraft designs. However, long before the BD-4, BD-5, BD-6, and eventually the BD-10 jet project, his very first design, the Bede BD-1, must be considered his most successful. This petite little two-seat trainer and personal travel machine led to an entire line of fast, efficient, and fun production aircraft.

Fresh out of college in Kansas, Bede began his career in the late 1950s at North American Aviation as a performance engineer. While he remained at NAA for a relatively brief stint, this was a time of great innovation in military aviation design. His later use of honeycomb materials and other advanced design features likely began there.

Returning to his hometown of Cleveland in 1961, he created Bede Aviation Corp. His goal was to design and market a sporty two-seat homebuilt airplane that would outperform the Cessna 150, utilize modern design concepts, and could be towed to and from the airport. The result was the BD-1, a two-seat, low-wing monoplane that utilized revolutionary, for the time, aluminum honeycomb; bonded rather than riveted construction; and interchangeable control surfaces. The left and right wings, stabilizers, and elevators were identical. The simple landing gear incorporated a full swiveling nose gear, which 30 years later became the standard for new designs, such as those for Cirrus and Diamond.

For the wing, he chose a tubular spar that contained the fuel and incorporated a folding mechanism that allowed for highway travel. This fuel in the spar design carried through to all of the Yankees, Cheetahs, and Tigers produced by Grumman American and others. Its main structural member is a 6.5-inch cylindrical aluminum spar, which doubles as a 12-gallon fuel tank to provide a total of 24 gallons.

Certainly the most identifiable feature was the sliding canopy. Similar to the jet fighters he had worked on at NAA, the canopy simplified entry and exit, doing away with the heavy door structure and giving the pilot great visibility. Oh, yes, flying with the canopy open has always been cool. The entire kit, including the engine, was set to go on sale for just $2,500. All of this was heady stuff for the early 1960s.

The BD-1 first flew on July 11, 1963, and met or exceeded all design specifications. The prototype featured a 117-knot cruise speed, a VNE of more than 200 knots, and an initial climb rate in excess of 1,000 feet per minute. Initially designed as a kit, Bede was so pleased with the prospects for marketing his new design that he decided to go the Part 23 certification route for the BD-1.

Soon after, Bede Aviation became American Aviation Corp., the BD-1 would become the American Yankee, and a group of Cleveland businessmen came on board as investors. However, homebuilt kit design and certification of a Part 23 aircraft are two different challenges. Eventually, Bede and his new board disagreed on how to achieve these goals, and he departed the company in a foreshadowing of business issues that would follow him through his career. American Aviation, managed by the Cleveland business group, commissioned a modest redesign of the aircraft to make it easier to certify, and the AA-1 American Yankee debuted in 1968.

The Yankee became an immediate hit. With a price tag just less than $7,000, a sliding canopy, responsive controls, and a short-coupled fuselage, it was a delight to fly and outperformed the competition. It took just about six years for the first 1,000 aircraft to go out of the factory door. The AA-1 Yankee continued in production for more than 10 years in several different iterations. Its responsive controls and outstanding performance eventually inspired fighter-style paint jobs, such as Flying Tiger shark mouths, and likely even a few white scarves.

Flush with success, the American Aviation board decided a four-seat aircraft was required. Initially a clean-sheet concept, the AA-2 Patriot was designed, built, and test flown. However, it did not meet the desired performance goals and was scrapped. So efficient was the original Bede design that American Aviation decided to simply stretch it to create the space and performance required for a four-seat cross-country aircraft.

The result was the AA-5 Traveler, which proved to be an immediate success, outpacing the competition in both price and performance. The BD-1 design was flexible and seemingly timeless. Unfortunately, like so many aviation stories, this one contains several episodes of mergers and acquisitions.

American Aviation was soon purchased by military aerospace giant Grumman Aviation. Enter aerodynamic wizard Roy LoPresti. A team of Grumman engineers led by LoPresti worked their magic on the Traveler.

Using some tricks from the high-performance aircraft Grumman was famous for, they created two improved versions of the BD-1-inspired Traveler.

The 150 hp Cheetah and 180 hp Tiger earned a reputation as rapid transit machines. Even today, the Cheetah outruns 180 hp conventional fixed-gear singles, and the Tiger gives retracts a run for their money. Reduced cooling drag, optimized landing gear fairings, and other aerodynamic improvements added to Bede’s elegant BD-1 design, setting new standards for performance, value, and fun flying.

Bede went on to design a series of homebuilt kit aircraft. They were simple to construct, efficient, and often ahead of their time. His BD-5 Micro, wrapped in controversy as a piston-powered machine, went on to dazzle air show fans as the amazing BD-5J Microjet.

However, his original design, the BD-1, would shape the future of the GA industry. One look at a late model Cirrus, Tecnam, or Diamond, and their simplified landing gear, modern construction materials, aerodynamic cockpits and canopies, and attention to overall drag reduction are evident—just as they were on the original BD-1.

Eventually, Grumman Aerospace was sold to a Savannah, Georgia-based jet manufacturer in 1973 and became Gulfstream American. Most recently, West Virginia-based Tiger Aviation picked up the type certificate and produced the 180 hp Tiger until 2006.

In the end, Bede’s first design, the BD-1, fostered a line of more than 6,000 aircraft, up to and including the GA-7 Cougar Twin.

As a testament to the timeless design, so many of these spirited machines are lovingly maintained and still flown by their devoted owners. Thank you, Jim, for this incredible airplane. PP

Editor’s note: This story originally appeared in the July 2023 issue of Plane & Pilot. Subscribe to get the best in print! 

The post The Bede BD-1 appeared first on Plane & Pilot Magazine.

“We (some manufacturer) offer two 100-horsepower choices: a Rotax 912ULS (carbureted) and 912iS (fuel injected), plus the new 141-horsepower 915iS (fuel injected, intercooled). Yet everyone is ordering the 915.” More power always draws interest.

BRP-Rotax has bumped up the juice on the 912iS. Paul Mather of M-Square reported, “Rotax’s latest 912iS now offers 105 horsepower.”

This increase is not particularly unusual. BRP-Rotax has long been quite conservative with their initial numbers. Before the 915iS was ready for market, the Austrian manufacturer said to expect 135 horsepower. It turned out to test at 141 continuous horsepower, a 4-percent increase.

And Now…Rotax’s newest 916iS

At their Sun ‘n Fun Aerospace Expo 2023 press conference, Rotax said, “We are proud to achieve a new level of performance with the launch of our Rotax 916iS/c aircraft propulsion system, which makes it perfectly suitable for four seater planes and for high performance two seaters.” Float-equipped airplanes may embrace the more potent engine as an aid to break water faster.

How about 160 horsepower!? That’s a 19-horse or 13-percent gain in power, all essentially from the same engine core? With Mosaic set to allow four seaters, heavier airplanes, greater speed, and probably retractable gear, the newest 916iS seems perfectly situated for Mosaic.

However, since the new rule won’t allow deliveries before early 2025, does that mean a long wait for a 916iS? No, as it is not made expressly for Mosaic. Indeed, BRP-Rotax already has a launch customer: CubCrafters.

The popular Cub maker has never used Rotax. They used their own engine (one they had manufactured to their specifications). Understandably, the European engine maker is pleased to win CubCrafters as a new customer.

Rotax observed, “Our Rotax 916iS/c showcased its power for the first time in the new CubCrafters Carbon Cub UL, a new engineering prototype equipped with the 916iS.”

“Working with Rotax on the 916iS/c has been a great collaboration. We are excited to launch our latest products together and make them available worldwide,” said Patrick Horgan, president and CEO of CubCrafters. “The powerful and smooth single lever operation Rotax 916iS/c is outstanding, bringing the latest engine technology to the Carbon Cub family.” Patrick added that 916iS/c is compatible with fuels available worldwide.

Single lever control is a simplified means of offering an in-flight adjustable pitch propeller. SLC does not increase the pilot’s workload, eliminating the need for flight training required to use a constant-speed propeller. The concept, also used in every Cirrus airplane, was promoted by LAMA and is likely to be accepted by the FAA in Mosaic.

Progressive Aerodyne’s Searey offered a long-time test bed for single lever control installation. This particularly handsome Searey is operated by FlytheBeach.com, an active northern Florida flight operation that “has more Seareys than Searey.” FlytheBeach is operated by partners Ryan and Rose who have 4,500 Searey hours between them. This beautifully painted Searey was parked at Sun ‘n Fun 2023.

“The launch of the 916 ISC is yet another testament to our commitment to developing groundbreaking technologies and creating the most advanced propulsion system for our customers,” stated Rotax General Manager Peter Ölsinger of Rotax Propulsion Systems. He continued, “For us, it was crystal clear that we had to build on the success of the 915 engine. We can now seize new opportunities in the four-seat market segment with a perfectly mature product.”

How “mature” is this brand-new engine? Most new powerplants, especially from careful producers such as Rotax, begin life with a 1,000- or 1,200-, or perhaps a 1,500-hour time between overhaul (TBO). However, right out of the gate, 916iS/c offers a 2,000-hour TBO, matching the best from any engine maker in the industry. That shows confidence.

The latest 916iS/c has a maximum operating altitude of 23,000 feet; maximum continuous power is available to 15,000 feet.

Little Things That Matter a Lot

Notice that “c” on the end? It’s a little letter with a big meaning — “certified.” Rotax noted, “In addition, the 916iS/c is an alternative for IFR flights as well as for commercial flying, for example, flight schools. Of course, that little letter “c” its going to increase the price because it is “certified.”

However, Rotax literature specified other variations, such as the 916iS (no “c”), which they describe as the ASTM compliant engine, making them suitable for LSA today and Mosaic LSA or mLSA in 2025. The 916iS/c is certified by EASA (Europe’s rough equivalent to FAA). Commonly, reciprocal agreements between CAAs in western European nations and FAA in America allows the U.S. agency to accept EASA’s approval and vice versa.

Helicopters (and, finally, fully-built gyroplanes) are also expected to be permitted under Mosaic. As rotary aircraft often prefer higher power, 916iS appears to offer a good fit.

Since 915iS has been winning converts steadily, I predict a wonderful response to the latest and greatest from the largest supplier of light aircraft engines in the world.

Strap your seat belt securely, clear the sky ahead and push that SLC throttle to the max. Hoo-yah!

The post Rotax Surprises with a Mosaic-Ready Powerplant appeared first on Plane & Pilot Magazine.

We are excited to embark on reimagining what Plane & Pilot will be in the future. The brand has a storied history and we want to honor that legacy so Plane & Pilot can live on for another 50 years. 

Our goal is to make Plane & Pilot a brand that is an integral part of FLYING Media Group. We also want to ensure that it maintains a distinctive voice that is different from the other brands in the aviation industry, including FLYING Magazine.

When I first took up flying in 1992, I flew a Beechcraft Skipper and subscribed to two print magazines—FLYING and Plane & Pilot. 

FLYING was exciting because I always viewed it as an aspirational brand, showing what was possible. It featured the most exciting new aircraft, gear, and technology—ranging from the latest model pistons to the most powerful business jets. When I bought FLYING two years ago this summer, we doubled down on the aspirational elements of the magazine, improving the quality of the print edition and focusing on what is possible in aviation. 

Plane & Pilot was always a bit different. It had a “down to earth” essence to it, and as a young piston pilot, I always related to the content a bit better. At the time, I had limited resources and the content of the magazine was centered around the experiences of a recreational piston pilot. At the same time, it always illuminated the love and passion that its readers have had for flying piston airplanes. 

Today, I exclusively fly piston aircraft. I am a 500-hour pilot only qualified to fly VFR—I took 20 years off between college and my rediscovery of aviation. I fly because I love it and try to get in the air every few days.

While running FLYING, I was always a bit jealous of the potential of Plane & Pilot—to provide depth and focus on the recreational piston pilot and market. The magazine zeroed in exclusively on one aspect of aviation—and a part of the world that personally I had nearly all of my piloting experience in. 

FLYING Magazine is a special brand, but the mission of FLYING is to cover all aspects of general aviation (and at times delving into topics outside of GA), which leaves little room for the deep dives into the recreational piston story, a topic that is near and dear to my heart. 

Now with the two brands under the same umbrella, we can do exactly that—we can double down on Plane & Pilot as the brand dedicated to the mission of the recreational piston pilot, while continuing to focus FLYING Magazine on the aspirational stories of general aviation. 

I am honored to have the opportunity to participate in the journey of two of the greatest magazines in aviation. 

I hope you will join me in this journey and subscribe to both FLYING and Plane & Pilot. I promise it will be worth it! 

I would love to hear your feedback. You can reach me at @freightalley on Twitter.

—Craig Fuller, new owner of Plane & Pilot and founder/CEO of FLYING Media Group 

The post A New Era for ‘Plane & Pilot’ appeared first on Plane & Pilot Magazine.

Citabria	Citabria Explorer
STANDARD DATA: Citabria Aurora Seats 2. Gross wt. 1,750. Empty wt. 1,120. Fuel capacity 36. Engine 118-hp Lycoming O-235-K2C. PERFORMANCE: Top Cruise 109 KTAS. Initial climb rate 740 fpm. Ceiling 11,500. Stall 47 kts. Takeoff distance ground roll 650′. Landing distance roll 520′.	STANDARD DATA: Citabria Adventure/Explorer Seats 2. Gross wt. 1,750/1,800. Empty wt. 1,200/ 1,250. Fuel capacity 36. Engine 160-hp Lycoming O-320-B2B. PERFORMANCE: Top Cruise 127 KTAS. Initial climb rate 1,167/1,130 fpm. Ceiling 15,000/15,500. Stall 47/42 kts. Takeoff distance ground roll 430/412′. Landing distance roll 480/360′.
Super Decathlon	Scout
STANDARD DATA: Super Decathlon Seats 2. Gross wt. 1,950. Empty wt. 1,340. Fuel capacity 40. Engine 180-hp Lycoming AEIO-360-H1B. PERFORMANCE: Top Cruise 142 KTAS. Initial climb rate 1,280 fpm. Ceiling 15,800. Stall 48 kts. Takeoff distance ground roll 495. Landing distance roll 425′.	STANDARD DATA: Scout Seats 2. Gross wt. 2,150. Empty wt. 1,400. Fuel capacity 36-72. Engine 180-hp Lycoming O-360-C1G. PERFORMANCE: Top Cruise 109 KTAS. Initial climb rate 1,075 fpm. Ceiling 17,000. Stall 45 kts. Takeoff distance ground roll 490′. Landing distance roll 420′.

American Champion became somewhat of a legend when it rescued the Bellanca Super Decathlon from extinction. The company now owns the type certificate to the Model 7 and Model 8 Champion Line (Champs, Challengers, Citabrias, Decathlons, Scouts). American Champion switched to metal wing spars, replacing the wooden ones championed by Giuseppe Bellanca, and now manufactures five models of the distinctive high wing aircraft—three Citabrias, the Aurora, Adventure and Explorer, as well as the Super Decathlon and Scout. American Champion aircraft are popular as tailwheel trainers, aerobatic trainers as well as backcountry bush aircraft.

The post American Champion Citabria, Super Decathlon, Scout appeared first on Plane & Pilot Magazine.