This Alarus has flown an average of 228 hours per year since new, logging 4,336 hours total. The engine is a 115-horsepower Lycoming O-235, with nearly 500 hours remaining until the recommended time before overhaul (TBO) is reached. A proven and common engine type found in the Cessna 152, Piper Tomahawk, and Grumman AA-1, it has the reputation of being easy to own and having good parts availability.

• READ MORE: Top 8 Historic American Aircraft

Inside, the Alarus is far roomier than comparable two-place types. At 46” wide, the cabin is a full 8 inches wider than a Cessna 150 and is even wider than a 182. It is, in fact, only three inches narrower than a big Piper Cherokee Six. Gullwing doors make for easy entry and exit, and outward visibility easily bests most high-wing Cessnas.

The panel is neat and orderly, particularly when compared to most older aircraft types at this price range. A traditional “six-pack” of primary instruments is centered in front of the pilot, and an easily accessible radio stack is positioned in front of the passenger. Engine gauges are similarly arranged in a clean stack, making it easy to scan for information. 

• READ MORE: Bargain Buys on AircraftForSale: 1947 Beechcraft Bonanza

At a price that is typically associated with tired, worn-out types from the 1950s and 1960s, this Alarus provides a more modern flying experience with an airframe, accessories, wiring, and controls that should provide decades of trouble-free flying.

You can arrange financing of the aircraft through FLYING Finance. For more information, email info@flyingfinance.com.

The post Bargain Buys on AircraftForSale: 2003 Zenith CH 2000 Alarus appeared first on Plane & Pilot Magazine.

“We plan to continue to produce and sell aircraft and provide first-rate service, training, and support to our customers,” stated Jerry Meyer, CEO of ICON.

After recent difficult news for Searey producer Progressive Aerodyne and Seamax from Brazil, this may illustrate the challenge of bringing an LSA seaplane to market.

• READ MORE: ICON Bumps Useful Load of A5 LSA Seaplane

Producers of more fundamental seaplanes like Aero Adventure may shine a light on the value of simpler, more affordable projects. Aero Adventure will appear at Sun ‘n Fun and offers highly affordable aircraft.

Another Brazilian producer, Scoda Aeronautica, is enjoying good sales and success with their Super Petrel XP (recent article), which will debut at Sun ‘n Fun 2024.

The excitement in Lakeland, Florida is about to start. Check out all the latest and greatest at Sun ‘n Fun’s 50th Anniversary celebration.

Editor’s note: this story originally appeared on ByDanJohnson.com.

The post ICON Announces Bankruptcy Filing appeared first on Plane & Pilot Magazine.

Hartzell Propeller president JJ Frigge expressed enthusiasm about the acquisition, emphasizing its potential to enhance propeller development capabilities. “The acquisition allows Hartzell to further expand WhirlWind’s rapid propeller development capabilities for the design, tooling, and manufacturing of advanced carbon composite propellers,” Frigge stated.

Hartzell plans to maintain the WhirlWind brand and its product offerings, demonstrating a commitment to continuity and innovation within the sector. Jim Rust, former president of WhirlWind Propellers, will continue his service with Hartzell, leveraging his technological expertise in rapid prototyping composite propeller systems. Rust expressed his excitement about joining the Hartzell team, stating, “I am excited to be part of the Hartzell Propeller team and eager to see the WhirlWind brand continue to thrive under Hartzell’s leadership.”

The acquisition signals a strategic move by Hartzell to broaden its product portfolio and strengthen its position in the aviation market, particularly in the growing light-sport aircraft segment.

The post Hartzell Propeller Acquires WhirlWind Propellers, Diversifying Product Line appeared first on Plane & Pilot Magazine.

I’ll mention this news briefly as I wish to pay respect to fellow pilots. Two accidents on the weekend after we departed resulted in four fatalities, reportedly including one passenger. My sincere condolences to the surviving families. Oshkosh has enjoyed safe years with no loss of life, but when so many airplanes assemble, mathematical odds suggest that something is going to happen despite incredible efforts to make the event as safe as possible

In the heat of Oshkosh 2023, people proved adept at finding shade where they could, in this case, that offered by a tailplane and fuselage. During the week, a few Wisconsin days were rather warm. Cooling rains came mostly at night, sparing the airshow but surely soaking campers in tents. The campgrounds were full to the edges, and the Experimental Aircraft Association opened multiple other locations to handle the overflow. AirVenture’s campground metric—Camp Scholler can accommodate 40,000 campers, and that wasn’t enough—plus thick throngs of people to weave around anywhere I walked on the showgrounds suggested a great turnout to me. Indeed, EAA president and CEO Jack Pelton reported more than 677,000 visitors.

MOSAIC and More

Given the FAA’s earlier-than-predicted release of the highly anticipated NPRM (Notice of Proposed Rulemaking), it’s no wonder that the Modernization of Special Airworthiness Certification (MOSAIC) was on the minds of many aviators. The two things that are no longer included are drones and multicopters. Once they were removed, the regulation went forward swiftly.

MOSAIC burst upon the scene bearing some unanticipated surprises. Through its proposal, the FAA has confirmed that the industry did well regulating itself. The FAA has said repeatedly, “We want industry to do more.” ASTM International’s F37 light sport aircraft (LSA) committee members have clearly done an impressive job.

Various groups will closely examine the NPRM, producing summaries as soon as possible, so you can digest it and compose your response. I hope each of you will let the FAA know what you think, but write your own words. Scanning technology allows the FAA to group identical responses as one response, so say whatever you think, but don’t copy and paste language others have proposed. Also, be polite and constructive—ranting will not help.

• READ MORE: The Practical Magic of Economical Buys

Fly at Night?

Here’s one part of the NPRM that generated many comments. The question was raised: “Can a sport pilot fly at night…without a medical?”

One commenter wrote: “‘The FAA stated at a forum…[at Oshkosh 2023] that, yes, the intent is that for night flight a medical or BasicMed is required. The reason given was that they did not have enough trust in state driver agencies to adequately check eyes.”

I’m sure the person heard and quoted the FAA guys correctly. However, reading the Federal Register release of MOSAIC, I still believe the agency will use endorsements to allow sport pilot certificate holders to receive training in pursuit of skills for night flying, retractable gear, adjustable props, and even IFR. The language in the NPRM supports this on page after page.

More Aircraft Coming

I know what most readers enjoy, and fortunately I have the same interest. The following flying machines are ones I will be writing about in the days and weeks ahead at ByDanJohnson.com (a member of FLYING Media Group to become AffordableAviation.com over the next few months). By no means are these all the intriguing aircraft I saw at Oshkosh, but they are ones I think you will enjoy the most.

Aeroprakt A-32 Vixxen

I simply have to admire the Aeroprakt team, led by designer Yuri Yakovlev. Everyone on the planet is aware how its home country of Ukraine is under immense pressure from every direction, including Russian missiles flying and bombs dropping. How the team can keep it together is something of a miracle and certainly a credit to its dedication and resolve.

During AirVenture, former importer Dennis Long, who’s still helping, texted to say Aeroprakt had built its 1,500th aircraft. The company isn’t just repeating, though—it’s still innovating. One Aeroprakt on display, the A-32 Vixxen, featured a third door (similar to Jabiru J-230D, Montaer MC-01, and KFA’s Safari XL) to make loading baggage easier and allowing use of the aft space in the Vixxen’s roomy cockpit. New importer Andy Humphrey, who operates as Heavenbound Aviation in Johnstown, Ohio, showed me another Aeroprakt at Oshkosh that was fully equipped for IFR, a use he noted is “permitted for Special LSA when used for IFR flight or recurrent training.” A standard in development by ASTM should allow flight into IMC that is not presently advised.

Hawk Ultra Air

We’ve known Hawk for many years as it celebrated 40 years in 2022 (as did the Part 103 regulation). Today, one organization, CGS Aviation, builds the Special LSA version. In Oshkosh, I met a new engineer hired at CGS who confirmed it is going through the two-seater carefully, creating all-new CAD files that never existed with the original. This is a very worthy effort but prevented the company from displaying at AirVenture.

Bob Santom and son LB focus solely on the single-place CGS Hawks, including models that qualify for Part 103’s wonderful privileges. It turns out both CGS enterprises can stay busy. At AirVenture, the Santoms exhibited their open-cockpit Hawk Ultra Air. I thought it looked good with no Dacron skin covering the structure. I observed different pilots enter the cockpit—one weighing 165 pounds and one 240—and both seemed to fit easily. A 200-to-250-hour build for beginners, the display Hawk Ultra Air makes 103 with an airframe parachute, tipping the scales at a completely proper 278 pounds empty.

Aquilae

The name means eagle in Latin, a great moniker for an airplane even if everyone will ask how to spell it and say it—“ACK-will-ay.” Does it look familiar to you? It did to me as I toured the ultralight area at AirVenture. I had a hint, though.

Mark Mellicker represented the G1 STOL at airshows for the last couple years. As so often happens in aviation and any other business, events changed the organization and another company at AirVenture told me it was representing G1. So I had two clues when I saw Mellicker by the shiny, new airplane. He decided to go on his own and, voila, Aquilae.

When I write more about this, you will see it has a wing-fold system that many buyers like. It’s a large-ish, STOL-capable design like G1, but both G1 and Aquilae owe their design heritage to the Alisport Yuma from Italy, though that look significantly resembles the Zenith 701, the granddaddy of such designs.

Fusion Nano Gyro

I readily admit I was charmed by Fusion’s Nano Gyro when I saw it and reported on it from AirVenture 2021. However, it needed a different engine, and Jeffrey Boyd was already on it with European producer Fusion Copter.

At AirVenture this year, Boyd of Fly Ultralight Nano (FUN) showed an example propelled by a Hirth F23 engine producing 50 hp. He says it has behaved well for him and actually enjoyed success with sales of the modestly priced (less than $30,000) Part 103 aircraft. Big two-seat gyros are fun and essential for training, but once you know how to fly this type of aircraft, Nano might be the last one you ever need.

I tried it on for size in 2021 and loved the way it felt and fit. Now with more substantial and dependable power, I’d bet many more will arrive in the U.S. However, it’s already seen a good run as Fusion now has 35 flying around the world, and Boyd has led the charge in selling 21 units in the U.S. That’s a performance of which he can be proud.

GOGetAir G750

Here’s an aircraft I’ve seen for a few years at the German show, AERO Friedrichshafen, and enjoyed for those 25 years. But it seems appropriate to bring attention to a four-seater as that category will be coming in 16 months if we get “MOSAIC LSA” or MLSA.

Shannon Hankins and Alan Jackson from Scissortail Aerosport LLC are representing the G750 in North America. GoGetAir Aircraft is a fairly new company, arriving on the scene during what might be called the COVID-19 era. It started before the pandemic but had to immediately survive that trying period with its handsome aircraft.

The timing of Scissortail and GoGetAir is marvelous, being right on the cusp of MOSAIC being released. In the meantime, the FAA has registration categories, such as experimental exhibition, that allow the import of a small number of fully assembled aircraft to test the market. By late 2024 or early 2025, we should see MOSAIC become official regulation and then the G750 will easily fit the MLSA category, assuming the company chooses to pursue and declare compliance with ASTM standards. Naturally, we have yet to learn how the FAA will audit a new producer like GoGetAir, although third-party audits have been discussed.

The G750 is a four-seater, powered by the Rotax 915iS. This will be a very common combination when MOSAIC officially arrives, but the G750 also demonstrates style and a beautifully compound-curved leading and trailing edge wing.

Editor’s Note: This story originally appeared in the October 2023 issue of Plane & Pilot magazine. 

The post A New Lighter Side of Oshkosh appeared first on Plane & Pilot Magazine.

This is Pegaso, a European ultralight that expresses a beautiful style we expect from Italy.

Promecc is better known for its low-wing Sparviero, but Pegaso drew many admiring looks at Aero 2023.

Let’s take a deeper look at an aircraft that can help imagine what we’ll see as Mosaic emerges from FAA rule making in the second quarter of 2025.

Promecc Pegaso

Promecc Aerospace specializes in the design and manufacture of European-style ultralight aircraft predominantly using carbon fiber construction. As is more common in Europe, the company behind Pegaso and Sparviero has a larger operation involved in professional aviation.

The company’s first design, Sparviero, which translates to Sparrowhawk in English, was introduced in the early 2000s. This low-wing design evolved into the faster Freccia Anemo (in English: Fast Arrow) that was introduced in 2011, with a new wing design and aerodynamic refinements that produced a cruise speed of 260 kilometers per hour (140 knots) on 100 horsepower.

European aviation journalist Marino Boric, writing for the ByDanJohnson website stated, “Italian ultralight manufacturer Promecc, with deep roots in manufacturing of commercial aviation subassemblies, brought to Aero Friedrichshafen their Pegaso all-composite, sleek, high-wing aircraft, which derives from the low-wing Freccia.

“Pegaso offers now a new, more ergonomic interior and Marino reported it was “ready for series production.” Its access doors are now front-hinged, “making cabin entry much easier.”

The well-established, fast, retractable-gear, low-wing aircraft Freccia, which successfully passed the static load tests for the 600-kilogram (1,320-pound) certification in Germany, was also showcased together with Promecc’s best-priced fixed-gear low-wing.

In addition to the Rotax 912 and Rotax 914 turbo, the newer Freccia RG has the more powerful Rotax 915iS under the cowling. As Marino heard from company owner Mauro Dono at Aero 2022, the event was “terrific good” with several sold aircraft. It was not reported if Promecc plans to add the 915iS or (more increasingly, designers say) Rotax’s newest 160 horsepower 916iS. To my eyes, the Pegaso could easily accommodate the larger engine in its long, spacious nose cowling.

Promecc informed Marino that it contemplated bringing its aircraft to EAA AirVenture Oshkosh. If they do, I can imagine a warm response to this handsome airplane. Of course, pilots always want to know the price and Marino believed Promecc’s were enticing.

Marino reported that the company intends to offer to the U.S. public the full range of aircraft as factory built but also as “price-competitive” kits.

Kit prices in Europe: Sparviero €40.000 ($43,500 at posting), Pegaso €65.000 ($70,800), and Freccia €69.000 ($75,000). The full configuration of these kits was not known as this article went online. However, that much detail is moot until someone offers to represent the aircraft here because builder support from Italy would be challenging.

What may be most interesting is the potential for those relatively modest kit prices to translate into more affordable factory built prices once American representation is secured.

Here’s how Promecc describes the technical qualities of Pegaso:

• The fuselage is made of carbon fiber and resin certified for aviation industry
• The wing spars and every structural support are completely made of carbon fiber
• Painted with two-component polyurethane varnish, very resistant to UV rays
• The undercarriage is strong and flexible and made of composite materials
• The cockpit is spacious, ergonomic with a sporty finish
• Side-by-side ergonomic seats
• The cockpit is yet comfortable setting and offers excellent visibility
• Plexiglass canopy is available in transparent or with blue tint

How would Pegaso perform if Promecc engineers could fit the potent Rotax 916iS? The 160 horsepower engine has many designers planning installation.

With only 100 horsepower, Pegaso can achieve a cruise speed of 255 kilometers per hour (138 knots). Never exceed speed is 300 kilometers per hour (162 knots). Pegaso’s cantilevered wing construction may not allow MOSAIC weight capability (up to approximately 3,000 pounds is expected) but its sleek lines assure it can slip through the air smoothly.

Qualify Pegaso to ASTM standards with Rotax’s potent 916iS and the Italian producer could have a MOSAIC candidate on its hands. Of course, this still leaves the not-trivial challenge of establishing a distribution beachhead in the world’s largest aviation market. That’s an effort yet to be determined.

As Promecc is a producer of professional aviation components, it may be able to manage efficient manufacturing processes and use its size for economies of scale in the purchase of raw materials. Its work with other large producers may give it connections to create U.S. representation.

This combination of attributes could give the Italian company market entry into the world of MOSAIC—and what a beautiful shape it brings to the fleet.

TECHNICAL SPECIFICATIONS:
all data supplied by the manufacturer

Maximum Takeoff Weight — 1,320 pounds
Maneuvering Speed — 98 knots
Stall Speed — 38 knots
Cruise Speed — 119 knots
Takeoff Roll — 490 feet
Landing Distance — 720 feet
Fuel Capacity — 2 wing tanks holding 14.5 gallons each

The post Pegaso: Another Light Sport Airplane You Probably Haven’t Seen appeared first on Plane & Pilot Magazine.

“After nearly two years of rigorous R&D, testing, and production preparation, Icon is excited to announce that it has increased the gross weight of the A5 by 60 pounds, resulting in a new useful load of 490 pounds (up from 430 pounds),” the company stated.

How can ICON do that before MOSAIC arrives? Isn’t the limit 1,430 pounds, as permitted on LSA seaplanes or floatplanes? Well, no.

ICON did not initially use all the gross weight given to it. After engineers proved the structure could carry more weight, the company could make the change and amend its ASTM documentation for the FAA, a task made easier as Icon has already worked closely with the FAA on a Type Certified version of A5 in the primary category.

• READ MORE: The Icon A5: An LSA Amphib That Handles Like A Dream

As the A5’s Rotax 912iS burns less than five gallons of fuel per hour, the company says “this equates to an additional two hours of endurance or the ability to carry more baggage or heavier passengers.”

Backwards compatibility is of interest to present A5 owners. “All 2024 A5s will include this weight increase, and the solution can also be retrofitted on previous models as part of an option package that includes a 4-blade lightweight propeller from eProps that delivers increased performance and additional weight savings,” ICON said.

Said Jerry Meyer, ICON’s CEO: “In response to feedback from our owners and prospective customers, we elected to undertake further research and development to test the airframe and fully understand what we needed to do to increase the useful load. The solution is a reinforcement of our commitment to innovation, and a 60-pound increase is significant, especially in the LSA category.”

4-Blade eProp

In conjunction with the gross weight increase, Icon said the 4-blade propeller that it announced in 2023 is now standard on all new A5 LSA. The company said “eProps’ new propeller provides a 21 percent reduction in ground takeoff roll in standard conditions, increasing the versatility and safety of the aircraft.”

“The 4-blade propeller is a huge upgrade to my ICON A5,” said Santiago Masdeau, an A5 owner based in south Florida. “I’ve flown more than 100 hours with the original 3-blade and now I have around 20 hours on the new carbon fiber 4-blade. Immediately, I noticed less vibration and noise, better acceleration, and improved takeoff distances. I’ve also experienced an increase on my cruise speed at 5,000 rpm and lower fuel burn. The entire experience is better, and it looks amazing, too!”

A 2024 A5 Limited Edition starts at $409,000 with the Garmin G3X Touch available as an upgrade. Additional options include autopilot, a digital attitude indicator, a variety of signature paint schemes and colors, and Sirius XM Weather.

The company believes that type certification will allow Icon to expand its market potential around the world, especially in countries that have not yet adopted ASTM standards. The type certified version of the 2024 Icon A5 starts at $434,000.

The post ICON Bumps Useful Load of A5 LSA Seaplane appeared first on Plane & Pilot Magazine.

• READ MORE: Avions-Mudry CAP 10B

Equipped with a 180 hp Lycoming AEIO-360 capable of aerobatic and fully inverted flight and weighing roughly the same as a Cessna 150, the CAP 10 is at home upside down in various maneuvers or cruising to breakfast. Best of all, the type is factory-supported in Europe with ample parts availability, and certified in the standard category in the U.S.

This example comes fully restored, with only 205 hours on the engine since major overhaul, a new prop, new paint/interior, and new canopy glass. An experienced CAP 10 A&P/IA performed a detailed inspection of the airframe, and with consumables like brakes, tires, and hoses refreshed, the airplane is well set up for reliable flying with its new owner.

Pilots interested in a unique, aerobatic aircraft with a well-proven and capable engine should consider this 1981 Mudry CAP 10B, which is available for $97,000 on AircraftForSale.

Each day, the team at Aircraft For Sale picks an airplane that catches our attention because it is unique, represents a good deal, or has other interesting qualities. You can read Aircraft For Sale: Today’s Top Pick at FLYINGMag.com daily.

You can arrange financing of the aircraft through FLYING Finance. For more information, email info@flyingfinance.com.

The post Bargain Buys on AircraftForSale: 1981 Mudry CAP 10B appeared first on Plane & Pilot Magazine.

Read about the Cessna 120 and 140 in detail here.

Equipped with a smooth and quiet 85 hp Continental C85 that sips fuel at a rate of roughly 4.5-5 gallons per hour in cruise, operating costs are minimized. Only 176 hours have been logged since the last major overhaul. Additionally, this example has had its fabric wing converted to metal covering. At the expense of some additional weight, the result is a wing that no longer requires fabric inspection or a costly $10,000-plus fabric replacement. Robust spring-steel landing gear rounds out operating economy, with no bungee cords or shock absorbers to maintain or replace.

• READ MORE: Incredible Plane: Cessna 150

This example comes with a clean panel, shoulder harnesses, wingtip strobe lights, matching wheel pants, and timeless paint scheme. 

Pilots interested in a classic taildragger that’s as easy to fly as it is to own and maintain should consider this 1946 Cessna 120, which is available for $39,500 on AircraftForSale.

You can arrange financing of the aircraft through FLYING Finance. For more information, email info@flyingfinance.com.

Each day, the team at Aircraft For Sale picks an airplane that catches our attention because it is unique, represents a good deal, or has other interesting qualities. You can read Aircraft For Sale: Today’s Top Pick at FLYINGMag.com daily.

The post Bargain Buys on Aircraft For Sale: 1946 Cessna 120 appeared first on Plane & Pilot Magazine.

Top Picks

The Evektor Harmony is a next-generation model following its SportStar, which will forever hold the title of the first special LSA accepted by the FAA in April 2005. Flight Design’s CT was accepted on the same day.

Being first often conveys some advantages, but in an industry where new ideas often emerge, a successful producer cannot long rest on its past achievements. Based in an aviation-rich area of the Czech Republic, Evektor steadily upgraded SportStar through a series of alterations. Later, the company introduced Harmony with added sophistication.

The Harmony uses a more advanced compound wing—the leading edge does not form a straight line—to bring performance to the top of the category (restricted by present regulation, which may change with a new rule known as MOSAIC, or Modernization of Special Airworthiness Certificates). Pilots who fly a Harmony say it feels like a legacy GA airplane.

Evektor Harmony: 

• 120 knot cruise
• 615-pound useful load
• 46-inch-wide cabin
• 700 nm range

The Jabiru J-230D, hailing from Australia, is the result of years of development, beginning long before LSA came along. When FAA’s rule hit in 2004, the Down Under designer and manufacturer was quick to adapt its kit products to the new market.

J-230D resembles the company’s J-400, a four-seater. That many seats aren’t permitted on an LSA, so out they came, leaving an aft interior bigger than a Cessna 150. A third door sized for people brings the easiest luggage area loading among LSA, so taking along your pet is easily accomplished.

• READ MORE: Bargain Buys on AircraftForSale: 1952 Cessna 170B

Jabiru is a rare airframe builder that also makes its own engine. When you hear the word “Jabiru” (a large bird), you need to think airplane and powerplant, though the engines are also used on other airframes. A J-230D with the 6-cylinder Jabiru 3300 can readily hit the top speed among LSA.

Jabiru J-230D: 

• 120 knot cruise
• 507-pound useful load
• 45-inch-wide cabin
• 675 nm range

The Texas Aircraft Colt relies on the great success of a predecessor Brazilian design, but the Colt is all-American. One of the newer aircraft to the LSA fleet in the U.S., developers had the advantage of seeing what pilots were buying…and what they were requesting.

With its conventional yoke control, the Colt breaks a familiar mold in LSA, an overwhelming majority of which use joysticks in various forms. A refined aircraft, Colt is beautifully appointed inside and out, attracting pilots seeking a legacy GA airplane look in a ground-up-new design that can be operated by a sport pilot or higher-certificated pilot exercising the no-medical privilege of LSA.

• READ MORE: Don’t Forget Your Hangar Maintenance

Built entirely in Hondo, Texas, with solid local support, the Colt joins the best of an experienced Brazilian aircraft designer with American know-how and airplane building capability right here in the U.S.

Texas Aircraft Colt: 

• 118 knot max cruise
• 469-pound useful load
• 44-inch-wide cabin
• 800 nm range

Seaplane LSAs

Seaplanes quickly earn a special place in some aviators’ hearts because of the unique ability to land on water and for the versatility that amphibious gear affords. FAA recognized this interest and allowed 110 pounds more gross weight for qualifying seaplanes, and it also permitted amphibious gear. With a water bird, you have vastly more places to make a landing, whether for a pleasant visit or an emergency.

Vickers Aircraft closely observed American brand Icon after the California designer made a big splash with its A5 LSA seaplane. New Zealand-based Vickers saw an opportunity to achieve even more with its Wave.

Engineers took a different approach to creating the Wave. Using modern CAD methods and software similar to what Boeing or Lockheed practice, Vickers worked for years before unveiling a product, but when they did, it flew “right out of the box.” The company remains in testing as it works toward FAA acceptance but believes it can swiftly move to manufacturing because of the detailed preparation work. Indeed, elements are already being produced.

The Wave first tempted buyers with prices substantially below Icon’s eye-watering $375,000, although continued improvements and the latest engine from Rotax have pushed up its costs. Wave is an intriguing new amphibian loaded with special features and boasting a large interior complete with sliding doors.

Vickers Wave: 

• 120 knot max cruise
• 650-pound useful load
• 53-inch-wide cabin
• 1,850-pound max gross weight (via granted FAA exemption)

Scoda Aeronautica’s Super Petrel started its life in France. It was much different before the team at Edra, now Scoda Aeronautica, took over in Brazil. Here’s another seaplane entry from the South American nation that is big in aviation. The Super Petrel sets itself apart from all others with its biwing construction. You may not think that’s logical in the modern world, but Super Petrel is a highly efficient aircraft. Plenty of wing area helps it leave the water faster.

The shorter the water run, the less strain on an airframe. LSA seaplanes are masterful at this task, jumping off the water in a few seconds. Higher power to weight helps, but Scoda wanted to go even further.

• READ MORE: This Incredible Plane: The Convair F2Y Sea Dart

Scoda’s XP designation for the Super Petrel means extra performance, but you also get more airplane. The airframe was extended by 10 inches, bringing with it a bounty of benefits, including more luggage area. With Rotax’s potent 141 hp 915iS engine atop the center of gravity, the Super Petrel will leap out of the water with great energy.

Scoda Petrel XP: 

• 110 knot cruise
• 570-pound useful load
• 46-inch-wide cabin
• 330-foot water takeoff

Special Appeal

We like different cars, houses, and movies. We like specialized aircraft as well. These three serve different purposes. One is a highly refined “Cub-like” design from Europe. Another is one of the new batch of high-wing LSA aimed at the coming MOSAIC regulations. The third is another brand-new design that takes performance to the edge of what the FAA may allow under the new rule.

Zlin’s Norden is what some call a “Cub-like,” in that it somewhat resembles the iconic Piper Cub. It could hardly be more different despite its familiar fuselage shape and planform. Norden fairly bristles with features and refinements.

The Norden is a STOL performer with aluminum-structure wings equipped with electrically controlled leading-edge slats. It has been designed and tested for short-field and off-runway capabilities. While this new model gained FAA acceptance in early 2022, the Norden follows several other models, each building on the previous.

• READ MORE: Robin DR Series Singles. France‘s longtime favorite wood and fabric four-seat plane

The Norden flew excellently with 100 hp, because of its relatively low weight. Now fitted with the 141 hp Rotax 915iS, the airplane wants to jump into the air at the slightest encouragement from its pilot. 

A wide door allows easier access to both tandem seats. Norden is well equipped with modern avionics, so while you might fly it in unprepared areas, you’ll be fully prepared with information on big bright screens.

Zlin Norden: 

• 118 knot max cruise
• 518-pound useful load
• 45-degree Fowler flaps
• 800 nm range

The Airplane Factory’s Sling HW, or High Wing, is an all-new design clearly aimed at FAA’s coming MOSAIC regulation. A quick glance at the specifications below illustrates that Sling HW is well outside the current regulation for LSA. That’s OK for now. It can start with a kit or import a few aircraft in the experimental exhibition category.

Numbers are bigger than for a present-day LSA, and that’s great if you seek extra capability. Be prepared to pay for it. Most MOSAIC LSA unveiled to date are often priced well into the $200,000s, and several exceed $300,000. Still, that’s much less than a comparable legacy GA aircraft, and the Sling HW is big, comfortable, and well-equipped. A sleek composite exterior helps it outperform comparable models. 

• READ MORE: Affordable DIY: Hands-Free Flashlight

These MOSAIC LSA or mLSA are going to greatly expand the LSA range, and Sling producer TAF has long been an innovator. It is also supremely confident in its designs and loves to demonstrate that by literally flying a new design all the way around the world. The Sling has done so several times.

The Aircraft Factory Sling HW: 

• 142 knot max cruise
• 1,000-pound useful load
• four-seater
• 830 nm range

TL Ultralight’s Sparker is the newest from the well-established Czech producer. The company’s name refers to a European term for an aircraft type smaller and lighter than light sport aircraft. Yet the Sparker is ready for the newest FAA regulation basis even before it’s released.

The Sparker follows a tandem design called “Stream” that introduces ideas carried into it. One big leap forward—especially when the airframe is propelled by Rotax 141 hp 915iS engine—is cruise speed. At 170 knots, the Sparker becomes competitive with legacy aircraft like Cirrus’ SR20 at a fraction of the price.

• READ MORE: Bargain Buys on AircraftForSale: 1979 Cessna Skylane 182RG

Fast for cross-country flying, the Sparker boasts a generous cabin and spacious luggage area, easily accessed through a door on the pilot’s side. The panel also supports the pilot with three Garmin G3X touch screens. Deluxe throughout and handsomely built, the Sparker is ready for Mosaic. The first models in the U.S. will be certificated as experimental exhibition.

TL Ultralight Sparker: 

• 170 knot max cruise
• 548-pound useful load
• 49-inch-wide cabin
• 750 nm range

Affordable

Affordability is critical for many. Those with larger budgets can choose from many grand choices, but that leaves out too many pilots—or, more important, perhaps, would-be pilots. The fantastic news is that despite high inflation and other challenges, low-cost aircraft are available with diverse choices.

Aerotrek’s A240 has been so consistently popular that deliveries stretch out several months. Although worth the wait, impatient buyers enjoy a growing supply of used Aerotrek models, represented since the beginning of LSA by Rob Rollison.

The Kitfox is a well-known design that evolved from the earlier Avid Flyer, as did the Aerotrek. A resemblance is easily seen, but the designs have differentiated over many years of manufacturing (the pioneering Avid Flyer predates LSA by many years). 

In the Czech Republic, Aeropro has been steadily producing aircraft since 1990 and can now boast more than 650 aircraft flying around the world with the U.S. as a significant market. Aeropro chose not to grow sharply at early demand, instead keeping a calm hand on the throttle. As a result, the company built an experienced workforce with low turnover fabricating aircraft in a simple yet highly professional manner. Loaded with qualities, such as folding wings, and with sprightly performance, Aerotrek boasts a reasonably modest price tag.

Aeropro A240: 

• 112 knot max cruise
• 570-pound useful load
• 44-inch-wide cabin
• 525 nm range

The Orlican M-8 Eagle is an airplane that looks familiar yet isn’t quite what you expect. As soon as I explain that it’s an 80 percent-scale Cessna Skylane, some will recognize it immediately. Overall, it’s about half the plane: half the seats, half the useful load, and half the weight. However, it’s also one-third the price, comparing a M-8 Eagle to a new 182.

Orlican is unknown to most Americans, but the company has been in business for 60 years and does high-caliber work for major aircraft manufacturers. The principal designer created a similar aircraft for another company but left to join the much larger Orlican to see his Eagle to market.

Flying the machine shows further differences. A Skylane flies as a large luxury car drives, a bit ponderously compared to the far more responsive Eagle. Handling is sprightly without touchiness, a welcome combination. A composite exterior helps Eagle reach nearly the LSA speed limit.

Orlican M-8 Eagle: 

• 118 knot max cruise
• 592-pound useful load
• 46-inch-wide cabin
• 650 nm range

The Merlin Lite is a single-seater, one of only two in this article. The Merlin Lite can qualify as a Part 103 ultralight vehicle and take advantage of the least regulated sector in all of aviation. The entire rule can be printed on both sides of a single standard piece of paper. No pilot certificate is required, nor is a medical, or even N-numbers. Some say this is freedom in aviation.

However, pilots who believe they know Part 103 ultralights conjure an image of a super simple “tube-and-rag” aircraft, where the pilot sits out in the open flying 35 mph…not that we should find anything the least bit wrong with that. Whatever your Part 103 impression, the Merlin Lite will make you think differently.

Here’s an all-metal, fully enclosed, well-equipped aircraft that you can acquire for less than the average price of a new car in 2023. While a single-seater may not fit everyone’s needs, airplanes are commonly flown solo, so why pay for what you rarely use?

Merlin Lite: 

• 55-knot cruise
• on floats or motorglider
• all-metal
• least regulation/lowest cost

Kit-Built

Building your own aircraft is much more than saving a buck. For most, it is a learning experience, use of craftsmanship, or simply an absorbing hobby. When you’re done assembling your own airplane, you will know it in a way few pilots know their airplanes. You can also have precisely what you want, and you can change it anytime you wish.

Lockwood Aircraft’s AirCam is no LSA, but it might qualify as a MOSAIC LSA. Meanwhile, the AirCam has been such a hit that 200 have been built as kits. An AirCam looks somewhat unorthodox with its twin aft-mounted Rotax engines on a half-open-cockpit design, but you need to know why it looks this way.

The AirCam was custom-designed and built for one job: taking National Geographic-grade cover story photos of Namibian jungles and wildlife in Africa. The country’s terrain is utterly unforgiving. Clearings are few and small. The photographer, seated up front for photo missions, needs huge visibility and no obstructions. Plus, they wish to fly at the speed of nature–that is, slowly. An AirCam accomplishes all this like it was designed for it…because it was.

Yet pilots have discovered the AirCam offers flight qualities and versatility unmatched in any other aircraft, and that has created a growing group of AirCam enthusiasts. Some fly on floats, in some cases with three tandem seats. 

Lockwood AirCam: 

• climb on one engine
• 800-pound useful load (Gen 3), 
• loiter at 30 knots
• 6-hour endurance

Composite FX’s XET is perhaps the most unusual aircraft in this selection, but for some it may be completely mesmerizing. XET is the high end of a line of single-place helicopters, the smallest of which (XEL model) can qualify as a Part 103 ultralight needing no pilot certificate. Hundreds are flying successfully, a tribute to the original Canadian design by a non-helicopter pilot.

Today, the XET is expertly built by Composite FX in northern Florida. The company has vast experience in composites, and the owner is a helicopter fan. The linkup worked well, and today the company has a steady enterprise with a loyal following.

• READ MORE: Bargain Buys on AircraftForSale: 1965 American Champion Citabria

The “T” in XET stands for turbine. Composite FX’s engine shop modifies T62-T2A Solar Turbine engines, often used as an auxiliary power unit, and they produce a steady 95 hp. In the hands of skilled helicopter pilots, performance on the XET is impressive. Kit-built, the XET can get airborne for less than $100,000. That’s amazing.

Composite FX XET: 

• 70 knot cruise
• 400-pound useful load
• 10.5 mph fuel burn
• 1.9-hour endurance

CGS Aviation’s Hawk is for fun. Trying to identify a work purpose would completely shoot down its charm. This article started with lines about elevating yourself and perhaps finding joy in the air. Of all the aircraft in this piece, Hawk may be most likely to put a smile on your face.

All aircraft here are top choices. Depending on your interest, these machines are capable of displaying impressive performance. The Hawk is a far simpler proposition. Designed in the early 1980s with more than 2,500 flying, it exhibits easy handling, stable flying, economic purchase and operation, low maintenance, and modest cost. What’s not to like?

• READ MORE: Bargain Buys on AircraftForSale: 1979 Beechcraft Skipper

The Hawk is versatile, available as a Part 103 ultralight (through a related company), a kit aircraft, or a fully built special LSA, so you don’t have to build. The best proof you can find—ask any owner what he likes about his Hawk and allow plenty of time for that conversation.

Hawk Arrow II:

• 70 knot max cruise
• 550-pound useful load 
• tricycle or tailwheel
• 300-hour build time (fully built available)

You have many more choices than those portrayed above. This was a broad and varied sampling, but it was only a narrow view of the affordable aviation field. To offer a sampling of the 158 aircraft the FAA has accepted as special (fully built) light sport aircraft, plus more than 100 kit-built models, I’ve divided the 15 subject aircraft into five categories. 

• READ MORE: Bargain Buys on AircraftForSale: 1959 Piper PA-22-150

These 15 aircraft are good representatives but between them account for just 6 percent of the models available. Buyers enjoy many diverse choices, one of which might be perfect. I encourage you to explore more fully at ByDanJohnson.com (to become AffordableAviation.com over the next few months), now a member of the FLYING Media Group family.

Editor’s Note: This story originally appeared in the September 2023 issue of Plane & Pilot magazine. You can subscribe here.

The post Top Picks in Today’s Light Sport Aircraft Market appeared first on Plane & Pilot Magazine.

On three separate visits to Rotax, I was able to attend one of their Fly-in events, plus a special visit just for aviation journalists.

Beautiful and inviting as Wels is, this is not an easy visit for folks from the company’s far-flung customer base in nearly every country on Earth. So, in addition to inviting the world to their headquarters event, Rotax is going abroad.

Get ready for Rotax’s World Tour 2024

The Biggest goes Bigger

BRP-Rotax is the Austrian subsidiary of BRP Inc., “a leader in the development and production of propulsion systems for the recreational and power sports markets,” according to the company.

Founded in 1920, BRP-Rotax builds innovative Rotax four-stroke and two-stroke high-performance engines used in products such as Ski-Doo and Lynx snowmobiles, Sea-Doo personal watercraft, Can-Am onroad and offroad vehicles, as well as for karts and sport planes. More than 1,700 employees work in Gunskirchen with a smaller, separately-quartered group focused exclusively on aircraft engines (considered a premiere job within the enormous facility).

Headquartered in Quebec, Canada, BRP has annual sales of CA $10 billion from over 130 countries and a global workforce of close to 23,000.

In the light aviation community, the Rotax name dominates with more than 75 percent of the market. Rotax works directly through a network of national distributors, which in turn serve more than 250 original equipment manufacturers (OEMs)… or, simply, aircraft manufacturers to you and me.

If it’s light and flies, odds are high it is powered by a Rotax engine.

• READ MORE: CubCrafters Votes for New Rotax Powerplant

Given its globe-spanning reach, the company’s World Tour 2024 will bring the company directly to customers and businessmen alike. Read below what each of the locations has to offer.

Rotax announced from Gunskirchen, Austria on February 6, “The Rotax Fly-In event, which in the past exclusively took place in Wels, Austria, will be rolled out internationally, as announced last August. Brazil was the first stop of the Rotax Fly-In world tour, reflecting the high interest in BRP events far beyond Europe, with almost 200 aviation enthusiasts in attendance.”

Rotax’s Fly-In World Tour “serves as a platform for all aviation enthusiasts and curious minds to celebrate the aviation community, discover new developments, and put things to the test.,” the company wrote. “In other words, the Rotax Fly-In World Tour is a new international aviation festival. Similar to the Rotax Fly-In in Austria, all events are designed to be informative and entertaining, maintaining the quality standards of BRP-Rotax. The events will be organized and hosted by the independent distribution and service partner network.” 

“Being able to announce such an impressive lineup in the first year highlights once again the commitment of our network partners. This event series is exactly what our customers have been asking for,” said Peter Oelsinger, general manager, BRP Rotax.

Welcome from Each Location

Rotax Fly-In Australia

April 12-14

Location: Parkes Airport, Parkes (NSW 2870), Australia

Organizer: Bertflood Imports Pty, Ltd.

“Explore the World of Rotax Aircraft in a friendly and informal environment at the Fly-In 2024 at Parkes Airport in NSW. See the latest Rotax engines and chat with like-minded pilots and flight enthusiasts from Australia and all over the world. Visit the aircraft demonstration area and see the latest new aircraft. Listen to expert speakers and get great tips on engine maintenance. Rotax has provided a fantastic program with exciting activities and catering. Don’t miss out–come and join us!”

Rotax Fly-In Austria

August 23-24

Location: Weiße Möwe Wels (LOLW), Austria

Organizer: BRP-Rotax GmbH & Co KG

“Discover the world of Rotax Aircraft in a casual atmosphere at the Fly-In 2024 in Wels. Chat and share your experiences with like-minded pilots and flight enthusiasts from all over the world. Rotax has planned a program with exciting activities and catering. Don’t miss it!” This beautiful town in Austria is also near the Rotax factory; if tours are offered, by all means, go. —DJ

Rotax Fly-In Canada

September 7

Location: Vernon – Rotech Motor Ltd. (CYVK), BC Canada

Organizer: Rotech Motor Ltd.

“The Rotax Fly-In World Tour is set to visit Canada in a very big way. Vernon, B.C., Canada, is home to the world’s first Rotax aircraft engine distributor—now with a flourishing community of Rotax pilots. Don’t miss this chance to visit such a beautiful region of The Great White North with like-minded aviators.”

Rotax Fly-In Argentina

October 26-27

Location: Aeroclub La Cumbre (SACC), Argentina

Organizer: Ultralight SRL

“Beautiful Argentina has yet another attraction to see. La Cumbre, near the city of Cordoba, is one of those destinations not to be missed. La Cumbre, meaning ‘the peak,’ is sure to be one of the peaks of 2024. This World Tour event will be filled with fun, community, food, and flying, of course!”

The post Rotax Aircraft Engines Fly-In World Tour 2024 appeared first on Plane & Pilot Magazine.